| (Code: MP214) | Instructions for the construction of a model compatible with MP114, GSM22 and other Meccano 4½” gauge locomotives, this detailed and realistic 1:14 scale 1950’s railway carriage can be built with a Set 10 plus 16 extra 5½” x 1½” flexible plates.
16 pages of text plus all-colour photographs.
Please note these Model Plans are designed by individual Meccano modellers and may use parts not currently available. The level of instruction detail is dependent on the original modeller and varies from plan to plan. These are instructions only. |
|
| (Code: M918D30) |
A small but powerful Motor suitable for use with Meccano.
* Motor with 30:1 reduction gearbox
* Fitted with flange (3x3 holes approx) to attach to Meccano using the included bolts & nuts
* 147rpm on 1.5v, 293rpm on 3v |
|
| (Code: M057C-10) | BULK BUY & SAVE ON INDIVIDUAL PRICE
These are new unused original Meccano (Liverpool) parts but may show signs of age |
|
| (Code: M538-10) | BULK BUY & SAVE ON INDIVIDUAL PRICE
These are new unused original Meccano (Liverpool) parts but may show signs of age |
|
| (Code: M027F-10) | BULK BUY & SAVE ON INDIVIDUAL PRICE
These are new unused original Meccano (Liverpool) parts but may show signs of age
Plastic with a brass centre.
Can be used together at any angle, as a pulley or combination of both |
|
| (Code: M235G/AG-10) |
BULK BUY & SAVE ON INDIVIDUAL PRICE
These are new unused original Meccano (Liverpool) parts but may show signs of age
|
|
| (Code: M002/AG-10) |
BULK BUY & SAVE ON INDIVIDUAL PRICE
These are new unused original Meccano (Liverpool) parts but may show signs of age
|
|
| (Code: Lot2) | A set of ten Meccano original mid-green parts
Medium to heavy used condition |
|
| (Code: M126/AG-10) | BULK BUY & SAVE ON INDIVIDUAL PRICE
NB: UK Yellow is a slightly darker shade than later French yellow
These are new unused original Meccano (Liverpool) parts but may show signs of age |
|
| (Code: M024C-10) | BULK BUY & SAVE ON INDIVIDUAL PRICE |
|
| (Code: ME12R) | This motor is maximised for powerSimilar to Meccano E15R & E20R motors but runs slower with much more power. A modern powerful 12v dc motor is "sandwiched" between two sideplates. With on-off/revesing switch which can be remotely operated with an adaptor (supplied). The drive from the motor is transmitted through 90 deg via a worm and pinion giving a 25:1 reduction ratio. In this configuration the final drive is reduced but very powerful. This final drive output is then at right angles out of both side plates. This shaft can be substituted with a longer one. Side plates 127mm x 63mm (10x5 holes), width 43mm. |
|
| (Code: MEP-S) | * A motor is maximised for power with an integral gearbox
* A fixed output of 37rpm at 12v dc
* Output shaft size 4mm
* Motor & gearbox length 60mm
* Shaft length 8mm
* Fitted with a 3 x 3 hole size plate for attaching to a Meccano Model
|
|
| (Code: MBATT1) | Separate outputs each controlled by a reversing switch for 12v and 4.5v. Designed for use where current consumption is low. |
|
| (Code: MP162) | These instructions describe the construction of a model based very loosely on photographs of Allchin steam wagons of around 1915 to 1922. This is a model driven by a concealed electric motor and is designed to be built with the contents of a Meccano number 10 set.
This leaflet consist of 12 pages of construction description, colour photographs and parts list. The builder will have to have experience of interpreting pictures as the instructions are an overall building guide for each part of the model.
Please note these Model Plans are designed by individual Meccano modellers and may use parts not currently available. The level of instruction detail is dependent on the original modeller and varies from plan to plan. These are instructions only. |
|
| (Code: MP260) |
These instructions describe the construction of a model of a finely-detailed model a 1940's motor coach derived from the Midlands Red single-decker bus.
The chassis has a 3-speed and reverse gearbox and a working clutch, with differentials on both rear axles, all driven by a PDU motor, and working gear selector lever, brake pedals and steering.
Both interior and exterior are packed with interesting details including hinged driver's, luggage compartment and passenger doors, the last operated by a lever in the driver's cab.
The plan includes text, parts list and over 60 photographs. 40 pages.
Please note these Model Plans are designed by individual Meccano modellers and may use parts not currently available. The level of instruction detail is dependent on the original modeller and varies from plan to plan. These are instructions only.
|
|
| (Code: Lot54) | A pair of original 1930's dark red Flanged Sector Plates
Original shorter (8 holes) version
Heavy used condition |
|
| (Code: Lot8) | A pair of 50mm (2") Meccano 1930's red Pulley Wheels
Poor condition, ideal for model building or refurbishment
|
|
| (Code: Lot6) | A set of four Meccano original mid-green parts
Medium to heavy used condition |
|
| (Code: Lot55) | Original style Windmill Sail finished in nickel
Good condition, some rust pitting on the front |
|
| (Code: Lot56) | Original style Windmill Sail finished in nickel
Good condition, some rust pitting on the front |
|
|
|
|
|
| (Code: E20R-Motor) | An original Meccano E20R motor
Tested and lubricated
Complete and good condition
|
|
| (Code: MBATT2) | A battery Box originally included in the 1970's Crane Multikit set and some of the last issued Liverpool Meccano sets.
There are holes to accept M611 or M612 plugs
The Motor which was included in the same sets is available separately. |
|
| (Code: M213B) | *** STOCK REDUCTION SALE HALF PRICE *** |
|
| (Code: M213A) | *** STOCK REDUCTION SALE HALF PRICE *** |
|
| (Code: Lot23) | Original Meccano UK made pulley and flexible ring
The flexible rings have hardened with age so should be left on the pulley
|
|
| (Code: Lot22) | Original Meccano UK made pulley and flexible ring
The tyres have hardened with age so should be left on the pulley
|
|
| (Code: Lot15) | A set of four original 1930's dark green angle girders
Used condition |
|
| (Code: Lot17) | Original 1920's made parts
early type with square ends
Used and aged condition |
|
| (Code: M022A-YP4) | BULK BUY & SAVE ON INDIVIDUAL PRICE
These are new unused original Meccano parts |
|
| (Code: Lot1) | A set of four original Meccano brass pulley wheels
Age tarnished condition |
|
| (Code: M125-DG-4) | BULK BUY & SAVE ON INDIVIDUAL PRICE
These are new unused original Meccano parts |
|
| (Code: Lot3) | A set of four Meccano original mid-green parts
Medium to heavy used condition |
|
| (Code: Lot2a) | A set of four Meccano original mid-green parts
Medium to heavy used condition |
|
| (Code: M225/G) | BULK BUY & SAVE ON INDIVIDUAL PRICE
These are new unused original Meccano parts |
|
| (Code: B222-4) | BULK BUY & SAVE ON INDIVIDUAL PRICE
NB: The shade on theses parts is slightly lighter than other UK Yellow parts in our stock
These are new unused original Meccano (Liverpool) parts but may show signs of age |
|
| (Code: E061-4) | A box of four new original Meccano parts in 1960's light green
May have some age related discolouration |
|
| (Code: Lot57) | Original style Windmill Sail finished in nickel
Good condition, some rust pitting on the front |
|
| (Code: MP253) |
These instructions describe the construction of a stunningly-realistic 1/10th scale, 43-inch long companion model to the Kenworth W900 Truck (ModelPlan 252) and the Log and Long Load Transporter (ModelPlan 208).
Features four-wheel articulating bogie with leaf suspension, landing gear, spare wheel carrier, working doors and simulated refrigerator unit, air tank and brakes.
12 pages including text, VirtualMec drawings, colour photographs and pa
Please note these Model Plans are designed by individual Meccano modellers and may use parts not currently available. The level of instruction detail is dependent on the original modeller and varies from plan to plan. These are instructions only.
|
|
| (Code: MSL10/12) | A photocopy of one of the 20 Meccano Leaflets originally supplied with a Set 10 From the 1950's onwards |
|
| (Code: M-SAMS6) | These instructions from the South African Meccano Models series describe the building of an excellent working model by Bill Steele of a Adams Radial Tank locomotive. Although built from Meccano parts this model has been enhanced with the addition of some 3-D printed parts. Alternative suggestions for modelling with Meccano, or easily obtainable materials are given
A 12 page booklet with full building instructions and full-colour, 3D VirtualMec drawings of every unit and assembly
Please note these Model Plans are designed by individual Meccano modellers and may use parts not currently available. The level of instruction detail is dependent on the original modeller and varies from plan to plan. These are instructions only.
|
|
| (Code: M173A) | This part is available new or used condition for a reduced price
Choose the condition from the drop-down list
|
|
| (Code: M173B) | Identical to part 173a except with a cross threaded hole for added flexibility of use
*** STOCK REDUCTION SALE HALF PRICE *** |
|
| (Code: MP224) | Instructions for a highly detailed model of a 1934 Aero Morgan 3-wheeled car, which can be built with little more than the contents a Set 10 plus a PDU motor.
As well as the V-Twin engine with working rocking tappets and valve gear, the model has a clutch and 3 speed and reverse gearbox, prototypical chain drive to the rear wheel, Sliding Pillar front suspension, steering, detailed interior and body and chassis constructed in the exact prototypical way.
20 pages with text, VirtualMEC drawings, diagrams and colour photographs.
Please note these Model Plans are designed by individual Meccano modellers and may use parts not currently available. The level of instruction detail is dependent on the original modeller and varies from plan to plan. These are instructions only. |
|
| (Code: MP194) | 20 page instruction booklet for this model based on a real vehicle. Scaled at 1:10 scale the model is powered by a Meccano PDU motor and has a clutch, 2-speed and reverse gearbox, differential, correctly-geared steering, four screw jacks and a simulated hydraulic scissors mechanism to raise the van body well above cab height. Two opening doors and a transparent roof panel enhance the bodywork.
The chassis has the correct wheel size, wheelbase and overhangs, and the scale-size body has a fixed bridge platform serviced by a sliding door.
Includes colour photographs and parts list, plus a separately-stapled 12-page booklet of diagrams.Please note these Model Plans are designed by individual Meccano modellers and may use parts not currently available. The level of instruction detail is dependent on the original modeller and varies from plan to plan. These are instructions only. |
|
|
|
